Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 85)

Brocade Mobility 7131 Access Point Product Reference Guide 73
53-1002517-01
4
NOTE
The access point could allow the operation of only one radio depending on the POE power level
provided. When only one radio is operational, it is configured as either a WIPS or WLAN radio.
Consequently, if the access point transitions from dual to single radio operation, a WIPS radio might
not be available.
To define the access point’s power setting:
1. Select System Configuration -> Power Settings from the menu tree.
Rates (Mbps) MCS Indices EVM Bandwidth Maximum Transmit
Power 2.4 GHz Maximum Transmit
Power 5 GH
1 -9 20MHz 20 NA
2 -9 20MHz 20 NA
5.5 -9 20MHz 20 NA
11 -9 20MHz 20 NA
6 -5 20MHz 22 19
9 -8 20MHz 22 19
12 -10 20MHz 22 19
18 -13 20MHz 22 18
24 -16 20MHz 21 18
36 -19 20MHz 20 17
48 -22 20MHz 18 15
54 -25 20MHz 17 13
MCS0/MCS8 -5 HT20/40 22 19
MCS1/MCS9 -10 HT20/40 22 19
MCS2/MCS10 -13 HT20/40 21 18
MCS3/MCS11 -16 HT20/40 21 17
MCS4/MCS12 -19 HT20/40 20 17
MCS5/MCS13 -22 HT20/40 19 16
MCS6/MCS14 -25 HT20/40 18 15
MCS7/MCS15 -28 HT20/40 17 15