Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 485)

Brocade Mobility 7131 Access Point Product Reference Guide 473
53-1002517-01
10
• Manual Adoption Configuration v
NOTE
To support switch discovery, a RFS4000, RFS6000 or RFS7000 model switch must be running
firmware version 1.1 or higher. The access point must running firmware version 2.0 or higher.
Auto Discovery using DHCP
Extended Global Options 189, 190, 191, 192 can be used or Embedded Option 43 - Vendor
Specific options can be embedded in Option 43 using the vendor class identifier:
BrocadeAP.71xx-V4-0-0.
** The access point uses an encryption key to hash passphrases and security keys. To obtain the
passphrase, configure an access point with the passphrase and export the configuration file.
Manual Adoption Configuration
A manual switch adoption of an AAP can be conducted using:
Code Data Type
List of Switch IP addresses
(separate by comma, semi-colon, or space delimited) 188 String
Switch FQDN 190 String
Access Point Encryption IPSec Passphrase (Hashed) ** 191 String
Access Point switch discovery mode
1 = auto discovery enable
2 = auto discover enabled (using IPSec) 192 String