Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 409)

Brocade Mobility 7131 Access Point Product Reference Guide 397
53-1002517-01
8
For information on configuring SNMP access settings using the applet (GUI), see Configuring SNMP
Access Control on page 4-92.
br7131>admin(system.snmp.access)>delete
Description:
Deletes SNMP access entries for specific v1v2 and v3 user definitions.
Syntax:
Example:
admin(system.snmp.access)>
list acl
-----------------------------------------------------------------------------
index start ip end ip
-----------------------------------------------------------------------------
1 209.236.24.1 209.236.24.46
admin(system.snmp.access)>
delete acl all
admin(system.snmp.access)>
list acl
-----------------------------------------------------------------------------
index start ip end ip
-----------------------------------------------------------------------------
For information on configuring SNMP access settings using the applet (GUI), see Configuring SNMP
Access Control on page 4-92.
The following parameters must be specified if is not none :
Authentication type set to md5 or sha1
Authentication password (8 to 31 chars)
The following parameters must be specified if is set to auth/priv :
Privacy algorithm set to des or aes
Privacy password (8 to 31 chars)
delete acl Deletes entry (1-10) from the access control list.
all Deletes all entries from the access control list.
v1v2c Deletes entry (1-10) from the v1/v2 configuration list.
all Deletes all entries from the v1/v2 configuration list.
v3 Deletes entry (1-10) from the v3 user definition list.
all Deletes all entries from the v3 user definition list.