Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 197)

Brocade Mobility 7131 Access Point Product Reference Guide 185
53-1002517-01
5
-----------------------------------------------------------------------------
--
1 icmp1 ICMP ALL 10.1.1.1 11.1.1.1 NO
10.1.1.10 11.1.1.10
admin(network.ipfilter)>
Once created, the filter displays within the Network Configuration -> IP Filtering screen.
Applying the Filter to a WLAN or LAN
Once created, filters in the IP Filter Table can be applied to a WLAN or LAN. Refer to the following
diagram to illustrate this point.
NOTE
When both LAN IP filtering and WLAN IP filtering are enabled, a packet must pass the criteria of both
LAN and WLAN filter policies.