Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 62)

50 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
2
6. Select 802.11n Network from the Property field and select either Enable or Disable from the
Value drop-down menu.
Select Disable when the 802.11n rate settings and performance values defined on the
access point cannot be sustained (due to network congestion or interference). Once
network conditions improve to the point where 802.11n traffic can be sustained, enable
the 802.11n Network parameter once again.
NOTE
If re-enabling the adapter for 802.11 support, ensure additional 802.11n settings (Aggregation,
Channel Width, Guard Interval etc.) are also enabled to ensure optimal operation.
7. Click OK to save the updates to the adapter’s configuration.