Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual
Page 345
Brocade Mobility 7131 Access Point Product Reference Guide
333
53-1002517-01
8
port
Sets the radius server
1
-primary or
2
-secondary)
secret
Sets the EAP shared secret
1
-
63
characters) for server
1
-primary or
2
-secondary).
The default password is “admin123” .
reauth
mode
Enables or disables EAP reauthentication.
period
Sets the reauthentication period
seconds (
30
-
9999
).
retry
Sets the maximum number of reauthentication
retries
1
-
99
).
accounting
mode
Enable or disable Radius accounting.
server
Set external Radius server IP address.
port
Set external Radius server port number.
secret
Set external Radius server shared secret
password.
timeout
Defines MU timout period in seconds (1-255).
retry
the
maximum number of MU retries to
1
-
10
).
syslog
Enable or disable syslog messages.
ip
Defines syslog server IP address.
adv
mu-quiet
Set the EAP MU/supplicant quiet period to
1
-
65535
).
mu-timeout
Sets the EAP MU/supplicant timeout in
seconds
(
1
-
255
).
mu-tx
Sets the EAP MU/supplicant TX period
1
-
65535
).
mu-retry
Sets the EAP maximum number of MU
retries to
1
-
10
).
svr-timeout
Sets the server timeout
1
-
255
).
svr-retry
Sets the maximum number of server retries to
1
-
255
).
Note: The WEP authentication mechanism
saves up to four different keys (one for each
WLAN). It is not requirement to set all keys, but
you must associate a WLAN with the same
keys.
enc
Sets the encryption type to
none
,
wep40
,
wep104
,
keyguard
,
tkip
, or
ccmp
) for WLAN
wep-keygu
ard
passkey
The passkey used as a text abbreviation for the
entire key length (
4-32
).
index
Selects the WEP/KeyGuard key (from one of
the four potential values of
1
-
4
).
hex-key
1
-
4
) for WLAN
ascii-key
1
-
4
) for WLAN
mixed-mode
Enables or disables interoperation with
WEP128 clients.