Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 255)

Brocade Mobility 7131 Access Point Product Reference Guide 243
53-1002517-01
6
2. Enter the appropriate information within the LDAP Configuration field to allow the access point
to interoperate with the LDAP server. Consult with your LDAP server administrator for details on
how to define the values in this screen.
LDAP Server IP Enter the IP address of the external LDAP server acting as the data source for the Radius
server. The LDAP server must be accessible from the WAN port or from the access point’s
active subnet.
Port Enter the TCP/IP port number for the LDAP server acting as a data source for the Radius.
The default port is 389.
Login Attribute Specify the login attribute used by the LDAP server for authentication. In most cases, the
default value should work. Windows Active Directory users must use “sAMAccountName”
as their login attribute to successfully login to the LDAP server.
Password Attribute Enter the password used by the LDAP server for authentication.
Bind Distinguished
Name Specify the distinguished name used to bind with the LDAP server.
Password Enter a valid password for the LDAP server.
Base Distinguished
Name Enter a name that establishes the base object for the search. The base object is the point
in the LDAP tree at which to start searching.