Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 344)

332 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Example:
admin(network.wireless.security)
set wpa-countermeasure enable
admin(network.wireless.security)>
show summary
----------------------------------------------------------------------
Secu Policy Name Authen Encryption Associated WLANs
----------------------------------------------------------------------
1 Default Manual no encrypt Lobby
2 WEP Demo Manual WEP 64 2nd Floor
3 Open Manual no encrypt 1st Floor
WPA Countermeasure enable
Related Commands:
For information displaying existing WLAN security settings using the applet (GUI), see Enabling
Authentication and Encryption Schemes on page 6-192.
br7131>admin(network.wireless.security)>create
Description:
Defines the parameter of Mobility 7131 Access Point security policies.
Syntax:
create Creates security parameters for the specified WLAN.
create Defines the parameters of a security policy.
show Displays new or existing security policy
parameters.
set sec-name Sets the name of the security policy.
auth Sets the authentication type for WLAN to
(
none , eap , or kerberos ).
NOTE: Kerberos parameters are only in affect
if "kerberos" is specified for the
authentication method (set auth
).
kerb realm Sets the Kerberos realm.
server Sets the Kerberos server ( 1 -primary,
2 -backup, or 3 -remote) to KDC IP address.
port Sets the Kerberos port to (KDC port) for
server (
1 -primary, 2 -backup, or
3 -remote).
Note: EAP parameters are only in affect if "eap"
is specified for the authentication method (set
auth ).
eap server Sets the radius server ( 1 -primary or as
2 -secondary) IP address .