Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 138)

126 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
5
Use the Ethernet Type Filter Configuration screen to build a list of filter types and configure them as
either allowed or denied for use with the this particular LAN.
To configure type filtering on the Mobility 7131 Access Point:
1. Select Network Configuration-> LAN -> LAN1 (or LAN2)-> Type Filter from the Mobility 7131
Access Point menu tree.
The Ethernet Type Filter Configuration screen displays for the LAN. No Ethernet types are
displayed (by default) when the screen is first launched.
2. Use the all ethernet types, except drop-down menu to designate whether the Ethernet Types
defined for the LAN are allowed or denied for use by the Mobility 7131 Access Point.
3. To add an Ethernet type, click the Add button.
The Add Ethernet Type screen displays. Use this screen to add one type filter option at a
time, for a list of up to 16 entries.