Br7131>admin(network.lan)>set, Description, Syntax: example – Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual
Page 300
288
Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Secondary DNS Server
: 192.168.0.3
WINS Server
: 192.168.0.255
admin(network.lan)>
For information on displaying LAN information using the applet (GUI), see Configuring the LAN
Interface on page 5-115.
br7131>admin(network.lan)>set
Description:
Sets the LAN parameters for the LAN port.
Syntax:
Example:
admin(network.lan)>
admin(network.lan)>
set lan 1 enable
admin(network.lan)>
set name 1 engineering
admin(network.lan)>
set ethernet-port-lan 1
admin(network.lan)>
set timeout 45
admin(network.lan)>
set trunking 1 disable
admin(network.lan)>
set native-vlan-tag 1 untagged
admin(network.lan)>
set auto-negotiation disable
admin(network.lan)>
set speed 100M
admin(network.lan)>
set duplex full
admin(network.lan)>
set dns 1 192.168.0.1
admin(network.lan)>set wins 1 192.168.0.254
admin(network.lan)>
set trunking disable
set
lan
Enables or disables the Mobility 7131 Access Point LAN interface.
name
Defines the LAN name by index.
ethernet-port-lan
Defines which LAN (LAN1 or LAN2) is active on the Ethernet port.
timeout
Sets the interval (in seconds) the Mobility 7131 Access Point uses to terminate its
LAN interface if no activity is detected for the specified interval.
trunking
Enables or disables 802.11q Trunking over the Mobility 7131 Access Point LAN port.
native-vlan-tag
Defines the untagged/tagged 802.1q native VLAN mode for LAN1 and LAN2.
auto-negotiation
Enables or disables auto-negotiation for the access point LAN port.
speed
Defines the access point LAN port speed as either 10 Mbps or 100 Mbps.
duplex
Defines the access port LAN port duplex as either half or full.
username
Specifies user name for 802.1x port authentication over the LAN interface.
passwd
The 0-32 character password for the username for the 802.1x port.
ip-mode
Defines the Mobility 7131 Access Point LAN port IP mode.
ipadr
Sets the IP address used by the LAN port.
mask
Defines the IP address used for Mobility 7131 Access Point LAN port network mask.
dgw
Sets the Gateway IP address used by the LAN port.
domain
Specifies the domain name used by the Mobility 7131 Access Point LAN port.
dns
Sets the IP address of the primary and secondary DNS servers.
wins
Defines the IP address of the WINS server used by the LAN port.