Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 441)

Brocade Mobility 7131 Access Point Product Reference Guide 429
53-1002517-01
8
Syntax:
Example:
Export FTP or SFTP Example:
admin(system.config)>
set server 192.168.22.12
admin(system.config)>
set user myadmin
admin(system.config)>
set file config.txt
admin(system.config)>
set passwd
admin(system.config)>
export ftp/export sftp
Export operation : [ Started ]
Building configuration file : [ Done ]
File transfer : [ In progress ]
File transfer : [ Done ]
Export Operation : [ Done ]
Export TFTP Example:
admin(system.config)>
set server 192.168.0.101
admin(system.config)>
set file config.txt
admin(system.config)>
export tftp
Export operation : [ Started ]
Building configuration file : [ Done ]
File transfer : [ In progress ]
File transfer : [ Done ]
Export Operation : [ Done ]
CAUTION
Make sure a copy of the Mobility 7131 Access Point’s current configuration is exported (to a
secure location) before exporting the access point’s configuration, as you will want a valid version
available in case errors are encountered with the configuration export.
For information on importing/exporting access point configurations using the applet (GUI), see
Importing/Exporting Configurations on page 4-104.
export ftp Exports the Mobility 7131 Access Point configuration to the FTP server. Use the set command to set the
server, user, password, and file name before using this command.
tftp Exports the Mobility 7131 Access Point configuration to the TFTP server. Use the set command to set the IP
address for the TFTP server before using the command.
terminal Exports the Mobility 7131 Access Point configuration to a terminal.
sftp Exports the Mobility 7131 Access Point configuration to the SFTP server. Use the set command to set the
server, user, password, and file name before using this command.