Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 447)

Brocade Mobility 7131 Access Point Product Reference Guide 435
53-1002517-01
8
Example:
admin(stats)>
send-cfg-ap 2
admin(stats)>
NOTE
The send-cfg-ap command copies all existing configuration parameters except Mesh settings, LAN
IP data, WAN IP data and DHCP Server parameter information.
For information on copying the access point config to another access point using the applet (GUI),
see Viewing Known Access Point Statistics on page 7-277.
br7131>admin(stats)>send-cfg-all
Description:
Copies the Mobility 7131 Access Point’s configuration to all of the Mobility 7131 Access Points
within the known AP table.
Syntax:
Example:
admin(stats)>
send-cfg-all
admin(stats)>
NOTE
The send-cfg-all command copies all existing configuration parameters except Mesh settings, LAN
IP data, WAN IP data and DHCP Server parameter information.
For information on copying the access point config to another access point using the applet (GUI),
see Viewing Known Access Point Statistics on page 7-277.
br7131>admin(stats)>clear
Description:
Clears the specified statistics counters to zero to begin new data calculations.
Syntax:
send-cfg-all Copies the Mobility 7131 Access Point’s configuration to all of the Mobility 7131 Access Points
within the known AP table.
clear wan Clears WAN statistics counters.
lan Clears LAN statistics counters for specified LAN index (either clear lan 1 or clear lan 2
all-rf Clears all RF data.
all-wlan Clears all WLAN summary information.