Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 80)

68 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
4
CAUTION
The access point’s country of operation is set from within the System Settings screen. If the
country code is changed, the access point’s power level, primary channel and secondary channel
return to their default values. If changing the country code, be aware these values will require
modification to their previous settings.
1. Select System Configuration -> System Settings from the Mobility 7131 Access Point menu
tree.
2. Configure the Mobility 7131 Access Point System Settings field to assign a system name and
location, set the country of operation and view device version information.
System Name Specify a device name for the Mobility 7131 Access Point. Brocade Mobility recommends
selecting a name serving as a reminder of the user base the Mobility 7131 Access Point
supports (engineering, retail, etc.). This name will appear in the WIPS server when one of
the radios is configured as a sensor and the WIPS functionality connects to the WIPS server.
The WIPS module only accepts names with up to 20 characters, keep that if intending to
use this AP as a sensor.
System Location Enter the location of the Mobility 7131 Access Point. The System Location parameter
acts as a reminder of where the AP can be found. Use the System Name field as a specific
identifier of device location. Use the System Name and System Location fields together to
optionally define the AP name by the radio coverage it supports and specific physical
location. For example, “second floor engineering”
Admin Email Address Specify the AP administrator's email address.