Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 366)

354 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Example:
admin(network.wireless.radio.802-11n[5.0 GHz].advanced)>
show advanced
-----------------------------------------------------------------------------
WLAN BSS ID BC/MC Cipher Status Message
-----------------------------------------------------------------------------
Lobby 1 Open good configuration is ok
HR 2 Open good configuration is ok
Office 3 Open good configuration is ok
-----------------------------------------------------------------------------
BSSID Primary WLAN
-----------------------------------------------------------------------------
1 Lobby
2 HR
3 Office
admin(network.wireless.radio.802-11n[5.0 GHz].advanced)>
show wlan
WLAN 1:
WLAN name : WLAN1
ESS ID : 101
Radio : 2.4 and 5.0 GHz
VLAN :
Security Policy : Default
QoS Policy : Default
Rate Limiting : disable
For information on configuring the Radio 2 Configuration options available to the access point
using the applet (GUI), see
Configuring the 802.11a/n or 802.11b/g/n Radio on page 5-167.
br7131>admin(network.wireless.radio.802-11n[5.0
GHz].advanced)>set
Description:
Defines advanced parameters for the target 802.11n (5.0 GHz) radio.
Syntax:
Example:
admin(network.wireless.radio.802-11n[5.0 GHz].advanced)>
set wlan demoroom 1
admin(network.wireless.radio.802-11n[5.0 GHz].advanced)>
set bss 1 demoroom
For information on configuring Radio 2 Configuration options available to the access point using
the applet (GUI), see Configuring the 802.11a/n or 802.11b/g/n Radio on page 5-167.
set wlan Defines advanced WLAN to BSSID mapping for the target 5.0 GHz radio.
bss Sets the BSSID to primary WLAN definition.