Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 146)

134 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
5
5. Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout
before the applet is closed.
Configuring Port Forwarding
Use the Port Forwarding screen to configure port forwarding parameters for inbound traffic from
the associated WAN IP address.
To configure port forwarding for the Mobility 7131 Access Point:
1. Select Network Configuration -> WAN -> NAT from the Mobility 7131 Access Point menu tree.
2. Select 1 to 1 or 1 to Many from the NAT Type drop-down menu.
3. Click on the Port Forwarding button within the Inbound Mappings area.
4. Configure the Port Forwarding screen to modify the following:
Add Click Add to create a local map that includes the name, transport protocol, start port, end
port, IP address and Translation Port for incoming packets.
Delete Click Delete to remove a selected local map entry.
Name Enter a name for the service being forwarded. The name can be any alphanumeric string
and is used for identification of the service.
Transport Use the Transport pull-down menu to specify the transport protocol used in this service.
The choices are ALL, TCP, UDP, ICMP, AH, ESP, and GRE.