Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 390)

378 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Example:
admin(network.dhcpc-host-opt)>
show
DHCP Client Hostname Option Mode : Disable
admin(network.dhcpc-host-opt)>
br7131>admin(network.dhcpc-host-opt)>set
Description:
Sets the DHCP client hostname option.
Syntax:
Example:
admin(network.dhcpc-host-opt)>
set mode disable
admin(network.dhcpc-host-opt)>
show
DHCP Client Hostname Option Mode : Disable
admin(network.dhcpc-host-opt)>
System Commands
br7131>admin(system)>
Description:
Displays the System submenu. The items available under this command are shown below.
show Sets the DHCP client hostname option mode to either enable or disable.
restart Restarts the Mobility 7131 Access Point.
show Shows Mobility 7131 Access Point system parameter settings.
set Defines Mobility 7131 Access Point system parameter settings.
lastpw Displays last debug password.
exec Goes to a Linux command menu.
arp Dispalys the access point’s arp table.
power-setup Goes to the Power Settings submenu.
aap-setup Goes to the Adaptive AP Settings submenu.
lldp Goes to the LLDP submenu.