Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 288)

276 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
7
2. Click the Refresh button to update the display of the Mesh Statistics Summary screen to the
latest values.
3. Click the Details button to display AP properties and radio information for those access points
in a mesh configuration with this detecting access point.
4. Click the Logout button to securely exit the Access Point applet. A prompt displays confirming
the logout before the applet is closed.
Conn Type Displays whether the bridge has been defined as a base bridge or a client bridge. For
information on defining configuring the access point as either a base or client bridge, see
Configuring Mesh Networking Support on page 9-447.
MAC Address The unique 48-bit, hard-coded Media Access Control address, known as the devices station
identifier. This value is hard coded at the factory by the manufacturer and cannot be
changed.
WLAN Displays the WLAN name each wireless bridge is interoperating with.
Radio Displays the name of the 802.11a/n or 802.11b/g/n radio each bridge is associated with.
T-put Displays the total throughput in Megabits per second (Mbps) for each associated bridge.
ABS Displays the Average Bit Speed (ABS) in Megabits per second (Mbps) for each associated
bridge.
Retries Displays the average number of retries per packet. A high number retries could indicate
possible network or hardware problems.