Description – Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual
Page 356
344
Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
2
Supported
19.5 Mbps
40.5 Mbps
3
Supported
26.0 Mbps
54.0 Mbps
4
Supported
39.0 Mbps
81.0 Mbps
5
Supported
52.0 Mbps
108.0 Mbps
6
Supported
58.5 Mbps
121.5 Mbps
7
Supported
65.0 Mbps
135.0 Mbps
8
Supported
13.0 Mbps
27.0 Mbps
9
Supported
26.0 Mbps
54.0 Mbps
10
Supported
39.0 Mbps
81.0 Mbps
11
Supported
52.0 Mbps
108.0 Mbps
12
Supported
78.0 Mbps
162.0 Mbps
13
Supported
104.0 Mbps
216.0 Mbps
14
Supported
117.0 Mbps
243.0 Mbps
15
Supported
130.0 Mbps
270.0 Mbps
admin(network.wireless.radio.802-11n[2.4 GHz])>
admin(network.wireless.radio.802-11n[2.4 GHz])>
show aggr
Radio Aggregation Settings
Receive A-MSDU Buffer Limit
:3839 bytes
Enable Transmit A-MPDU
:enable
Transmit A-MPDU Size Limit
:65536 bytes
Receive A-MPDU Size Limit
:65536 bytes
Receive A-MPDU Minimum Spacing
:0 usec
admin(network.wireless.radio.802-11n[2.4 GHz])>
admin(network.wireless.radio.802-11n[2.4 GHz])>
show qos
Radio QOS Parameter Set
11n-default
-----------------------------------------------------------------------------
Access Category
CWMin
CWMax
AIFSN
TXOPs (32 usec) TXOPs ms
-----------------------------------------------------------------------------
Background
15
1023
7
0
0.000
Best Effort
15
63
3
31
0.992
Video
7
15
1
94
3.008
Voice
3
7
1
47
1.504
CAUTION
If you do NOT include the index number (for example, "set dtim 50"), the DTIMs for all four BSSIDs
will be changed to 50. To change individual DTIMs for BSSIDs, specify the BSS Index number (for
example, "set dtim 2 50). This will change the DTIM for BSSID 2 to 50.
For information on configuring the Radio 1 Configuration options available to the access point
using the applet (GUI), see Configuring a WLAN Access Control List (ACL) on page 5-144.
br7131>admin(network.wireless.radio.802-11n[2.4 GHz])>set
Description:
Defines specific 802.11n (2.4 GHz) radio parameters.