Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 362)

350 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Syntax:
br7131>admin(network.wireless.radio.802-11n[5.0 GHz])>show
Description:
Displays specific 802.11n (5.0 GHz) radio settings.
Syntax:
Example:
admin(network.wireless.radio.802-11n[5.0 GHz])>
show radio
Radio Setting Information
Placement : indoor
MAC Address : 00A0F8715920
Radio Type : 802.11n (5.0 GHz)
HT Protection Mode : Pure HT
Channel Setting : uniform spreading
Power Level : 20 dbm (100 mW)
802.11 rate compatibility mode : A and N
Beacon Interval : 100 K-usec
DTIM Interval : 10 beacon intvls
RTS Threshold : 2341 bytes
QBSS Channel Util Beacon Intervl : 10 beacon intvls
QBSS Load Element Mode : enable
Single Antenna : disable
Dynamic Chain Selection : disable
show Displays 802.11n (5.0 GHz) radio settings
set Defines specific 802.11n (5.0 GHz) radio parameters.
advanced Displays the Advanced radio settings submenu.
mesh Goes to the Mesh Connections submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show radio Displays specific 802.11n (5.0 GHz) radio settings.
rates Displays specific 802.11n (5.0 GHz) radio rate settings.
aggr Displays specific 802.11n (5.0 GHz) aggregation settings.
qos Displays specific 802.11n (5.0 GHz) radio WMM QoS settings.