Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 392)

380 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(system)>show
Description:
Displays high-level system information helpful to differentiate this access point.
Syntax:
Example:
admin(system)>
show
system name : AP-71xx
system location : Atlanta Field Office
admin email address : [email protected]
system uptime : 0 days 4 hours 41 minutes
DNS Relay Mode : enable
SSLv2 support from HTTP server : enable
weak cipher support in SSL : enable
SSHv1 support : disable
led state : disable
AP-7131 firmware version : 4.4.0.0-069R
country code : us
ap-mode : independent
serial number : 05224520500336
model : br7131N
admin(system)>
For information on displaying System Settings using the applet (GUI), see Configuring System
Settings on page 4-67.
br7131>admin(system)>set
Description:
Sets Mobility 7131 Access Point system parameters.
Syntax:
show Displays Mobility 7131 Access Point system information.
set name Sets the Mobility 7131 Access Point system name to (1 to 59 characters).
The access point does not allow intermediate space characters between characters
within the system name. For example, “br7131 sales” must be changed to
“br7131sales” to be a valid system name.
loc Sets the Mobility 7131 Access Point system location to (1 to 59 characters).
email Sets the Mobility 7131 Access Point admin email address to (1 to 59
characters).