Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 359)

Brocade Mobility 7131 Access Point Product Reference Guide 347
53-1002517-01
8
-----------------------------------------------------------------------------
BSSID Primary WLAN
-----------------------------------------------------------------------------
1 Lobby
2 HR
3 Office
admin(network.wireless.radio.802-11n[2.4 GHz].advanced)>
show wlan
WLAN 1:
WLAN name : WLAN1
ESS ID : 101
Radio Band(s) : 2.4 and 5.0 GHz
VLAN :
Security Policy : Default
QoS Policy : Default
Rate Limiting : disabled
For information on configuring Radio 1 Configuration options available to the access point using
the applet (GUI), see Configuring the 802.11a/n or 802.11b/g/n Radio on page 5-167.
br7131>admin(network.wireless.radio.802-11n[2.4
GHz].advanced)>set
Description:
Defines advanced parameters for the target 802.11n (2.4 GHz) radio.
Syntax:
Example:
admin(network.wireless.radio.802-11n[2.4 GHz].advanced)>
set wlan demoroom 1
admin(network.wireless.radio.802-11n[2.4 GHz].advanced)>
set bss 1 demoroom
For information on configuring Radio 1 Configuration options available to the access point using
the applet (GUI), see Configuring the 802.11a/n or 802.11b/g/n Radio on page 5-167.
br7131>admin(network.wireless.radio.802-11n[2.4 GHz].mesh)>
Description:
Displays the mesh configuration submenu for the 802.11n (2.4 GHz) radio. The items available
under this command include:
set wlan
>
Defines advanced WLAN to BSSID mapping for the target radio.
bss Sets the BSSID to primary WLAN definition.