beautypg.com

Syntax: example – Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual

Page 357

background image

Brocade Mobility 7131 Access Point Product Reference Guide

345

53-1002517-01

8

Syntax:

Example:

admin(network.wireless.radio.802-11n[2.4 GHz])>

set placement indoor

admin(network.wireless.radio.802-11n[2.4 GHz])>

set ch-mode user

admin(network.wireless.radio.802-11n[2.4 GHz])>

set channel 11

admin(network.wireless.radio.802-11n[2.4 GHz])>

set power 4

admin(network.wireless.radio.802-11n[2.4 GHz])>

set antenna-type 1

admin(network.wireless.radio.802-11n[2.4 GHz])>

set antenna-gain 10.00

admin(network.wireless.radio.802-11n[2.4 GHz])>

set rf-mode b-only

admin(network.wireless.radio.802-11n[2.4 GHz])>

set rates

admin(network.wireless.radio.802-11n[2.4 GHz])>

set beacon 100

admin(network.wireless.radio.802-11n[2.4 GHz])>

set dtim 1 40

admin(network.wireless.radio.802-11n[2.4 GHz])>

set aggr ampdu enable

admin(network.wireless.radio.802-11n[2.4 GHz])>

set shortgi disable

admin(network.wireless.radio.802-11n[2.4 GHz])>

set single-antenna disable

admin(network.wireless.radio.802-11n[2.4 GHz])>

set preamble disable

admin(network.wireless.radio.802-11n[2.4 GHz])>

set rts 2341

admin(network.wireless.radio.802-11n[2.4 GHz])>

set qos cwmin 125

admin(network.wireless.radio.802-11n[2.4 GHz])>

set qos cwmax 255

admin(network.wireless.radio.802-11n[2.4 GHz])>

set qos aifsn 7

admin(network.wireless.radio.802-11n[2.4 GHz])>

set qos txops 0

admin(network.wireless.radio.802-11n[2.4 GHz])>

set qbss-beacon 110

admin(network.wireless.radio.802-11n[2.4 GHz])>

set qbss-mode enable

admin(network.wireless.radio.802-11n[2.4 GHz])>

set dynamic-chain-selection enable

set

placement

Defines the Mobility 7131 Access Point radio placement as indoors or outdoors.

ch-mode

Determines how the radio channel is selected (user, auto-20 or auto-40).

channel

Defines the radio channel used. Channel allowed depends on actual country of operation.

power

Defines the antenna power transmit level. Depends on radio type, channel and country.

antenna-type

Sets the numerical antenna type used with the access point (0-7). Antenna types include: 0-Default
antenna, 1-Dual band antenna, 2-Omni antenna, 3-Yagi antenna, 4-Embedded antenna, 5-Panel
antenna, 6-Patch antenna, 7-Sector antenna.

antenna-gain

Sets the gain used by the selected antenna type (between 0.00 - 30.00 dBm)

rf-mode

Sets the default rates for the 802.11 mode selected (b-only, g-only, n-only, b-and-g, or
bg-and-n).

rates

Sets the supported radio transmit rates.

beacon

Sets the beacon interval used by the radio.

dtim

Defines the DTIM interval (by index) used by the radio.

aggr

Sets the radio’s aggregation.

shortgi

Enables/disables a short guard interval of 40MHz.

preamble

Enables/disables short preamble support for the radio (this is 2.4 GHz radio specific).

rts

Defines the RTS Threshold value for the radio.

range

Sets the radio’s extended range (in miles 0-50).

qos

Defines the cwmin, cwmax, aifsn and txops levels for the QoS policy used for the radio.

qbss-beacon

Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).

qbss-mode

Enables/disables the QBSS load element.

single-antenna

Enables/disables single antenna support. Enable (default setting) to decrease sensitivity and device
retries.

dynamic-chain-sele

ction

Enables/disables dynamic chain selection for the radio. For more information, see Dynamic Chain
Selection on page 1-5
.

tkip-ht-compatibility

Enables/disables TKIP-HT rates compatibility.

bcmc-tx-speed

Sets the transmission speed to either range or throughout mode.