Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 120)

108 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
4
4. Refer to the Status field to assess the completion of the import/export operation.
CAUTION
If errors occur when importing the configuration file, a parsing message displays defining the line
number where the error occurred. The configuration is still imported, except for the error.
Consequently, it is possible to import an invalid configuration. The user is required to fix the
problem and repeat the import operation until an error-free import takes place.
NOTE
Brocade Mobility recommends importing configuration files using the CLI. If errors occur during the
import process, they display all at once and are easier to troubleshoot. The access point GUI displays
errors one at a time, and troubleshooting can be a more time-consuming process.
NOTE
When importing the configuration, a xxxxxbytes loaded status message indicates the file was
downloaded successfully. An Incompatible Hardware Type Error message indicates the
configuration was not applied due to a hardware compatibility issue between the importing and
exporting devices.
5. Click Apply to save the filename and Server IP information. The Apply button does not execute
the import or export operation, only saves the settings entered.
6. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on Config Import/Export screen to the last saved configuration.
7. Click Logout to securely exit the Mobility 7131 Access Point Brocade Mobility Access Point
applet. A prompt displays confirming the logout before the applet is closed.
Status After executing an operation (by clicking any of the buttons in the window), check the
Status field for a progress indicator and messages about the success or errors in
executing the Import/Export operation. Possible status messages include:
ambiguous input before marker: line
unknown input before marker: line
ignored input after marker: line
additional input required after marker: line
invalid input length: line <number>
error reading input: line
import file from incompatible hardware type: line
[0] Import operation done
[1] Export operation done
[2] Import operation failed
[3] Export operation failed
[4] File transfer in progress
[5] File transfer failed
[6] File transfer done
Auto cfg update: Error in applying config
Auto cfg update: Error in getting config file
Auto cfg update: Aborting due to fw update failure
The value appearing at the end of some messages relates to the line of
the configuration file where an error or ambiguous input was detected.