Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 303)

Brocade Mobility 7131 Access Point Product Reference Guide 291
53-1002517-01
8
For an overview of the access point’s mesh networking options using the applet (GUI), see on page
9-443.
Network LAN, WLAN-Mapping Commands
br7131>admin(network.lan.wlan-mapping)>
Description:
Displays the WLAN/Lan/Vlan Mapping submenu.
For an overview of the access point’s VLAN configuration options using the applet (GUI), see
Configuring VLAN Support on page 5-118.
br7131>admin(network.lan.wlan-mapping)>show
Description:
Displays the VLAN list currently defined for the Mobility 7131 Access Point. These parameters are
defined with the set command.
Syntax:
Example:
admin(network.lan.wlan-mapping)>
show name
-----------------------------------------------------------------------------
Index VLAN ID VLAN Name
show Displays the VLAN list currently defined for the Mobility 7131 Access Point.
set Sets the Mobility 7131 Access Point VLAN configuration.
create Creates a new Mobility 7131 Access Point VLAN.
edit Edits the properties of an existing Mobility 7131 Access Point VLAN.
delete Deletes a VLAN.
lan-map Maps Mobility 7131 Access Point existing WLANs to an enabled LAN.
vlan-map Maps Mobility 7131 Access Point existing WLANs to VLANs.
.. Moves to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI and exits the session.
show name Displays the existing list of VLAN names.
vlan-cfg Shows WLAN-VLAN mapping and VLAN configuration.
lan-wlan Displays a WLAN-LAN mapping summary.
wlan Displays the WLAN summary list.