Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 328)

316 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
VRFY : allow
EXPN : allow
admin(network.wan.content)>
list ftp
FTP Commands
Storing Files : deny
Retreiving Files : allow
Directory Files : allow
Create Directory : allow
Change Directory : allow
Passive Operation : allow
Network WAN, Dynamic DNS Commands
br7131>admin(network.wan.dyndns)>
Description:
Displays the Dynamic DNS submenu. The items available under this command include:
For an overview of the Dynamic DNS options available using the applet (GUI), see Configuring
Dynamic DNS on page 5-135.
br7131>admin(network.wan.dyndns)>set
Description:
Sets the access point’s Dynamic DNS configuration.
Syntax:
Example:
admin(network.wan.dyndns)>
set mode enable
admin(network.wan.dyndns)>
set username percival
admin(network.wan.dyndns)>
set password mudskipper
set Sets Dynamic DNS parameters.
update Sets a manual Dynamic DNS update operation.
show Shows the Dynamic DNS configuration.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
set mode enable/disable Enables or disbales the Dynamic DNS service for the access point.
username Enter a 1 - 32 character username for the account used for the access point.
password Enter a 1 - 32 character password for the account used for the access point.
hostname Enter a 1 - 32 character hostname for the account used for the access point.