Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 322)

310 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page
6-216.
br7131>admin(network.wan.vpn)>delete
Description:
Deletes VPN tunnel entries.
Syntax:
Example:
admin(network.wan.vpn)>
list
--------------------------------------------------------------------------
Tunnel Name Type Remote IP/Mask Remote Gateway Local WAN IP
--------------------------------------------------------------------------
remidtype Sets the Remote ID type for IKE authentication for
(1 to 13 characters) to (
IP , FQDN , or
UFQDN ).
myiddata Sets the Local ID data for IKE authentication for
to . This value is not required when the
ID type is set to IP.
remiddata Sets the Local ID data for IKE authentication for
to . This value is not required when the
ID type is set to IP.
authtype Sets the IKE Authentication type for to
(
PSK or RSA ).
authalgo Sets the IKE Authentication Algorithm for to
MD5 or SHA1 .
phrase Sets the IKE Authentication passphrase for to
.
encalgo Sets the IKE Encryption Algorithm for to
(one of
DES , 3DES , AES128 , AES192 , or
AES256 ).
lifetime Sets the IKE Key life time in seconds for to
.
group Sets the IKE Diffie-Hellman Group for to either
G768 or G1024 .
delete all Deletes all VPN entries.
Deletes VPN entries .