Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 46)

34 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
2
Antenna connectors for single radio model access points are located on the same side of the
access point as the LAN and WAN port connections (GE1/POE and GE2). On single radio versions,
the R-SMA connectors can support both bands and should be connected to a R-SMA dual-band
antenna or an appropriate single band antenna. If necessary a R-SMA to R-BNC adapter (Part No.
25-72178-01) can be purchased separately from Brocade Mobility.
R1 defines the access point’s radio 1 antenna connectors and R2 defines radio 2 antenna
connectors.
The 2.4 GHz antenna suite includes the following models:
NOTE
An additional adapter is required to use ML-2499-11PNA2-01 and
ML-2499-BYGA2-01 model antennae. Please contact Brocade Mobility for more information.
The 5 GHz antenna suite includes the following models:
Part No. Antenna Type Approximate Gain (dBi)
ML-2499-11PNA2-01R Wide Angle Directional 8.5
ML-2499-HPA3-01R Omni-Directional Antenna 3.3
ML-2499-BYGA2-01R Yagi Antenna 13.9
ML-2452-APA2-01 Dual-Band 3/4
ML-2452-PTA2M3X3-1 Facade with 6 Element
Antenna Module 4.75/5.5
ML-2452-PTA3M3-036 3 Port MIMO Antenna 5/5