Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 408)

396 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(system.snmp.access)>show
Description:
Shows the SNMP v3 engine ID.
Syntax:
Example:
admin(system.snmp.access)>
show eid
AP-713X snmp v3 engine id : 000001846B8B4567F871AC68
admin(system.snmp.access)>
For information on configuring SNMP access settings using the applet (GUI), see Configuring SNMP
Access Control on page 4-92.
br7131>admin(system.snmp.access)>add
Description:
Adds SNMP access entries for specific v1v2 and v3 user definitions.
Syntax:
show eid Shows the SNMP v3 Engine ID.
add acl Adds an entry to the SNMP access control list with as the starting IP address and
and as the ending IP address.
v1v2c
: comm - community string 1 to 31 characters
: access - read/write access - (ro,rw)
: oid - string 1 to 127 chars - E.g. 1.3.6.1
v3
: user - username 1 to 31 characters
: access - read/write access - (ro,rw)
: oid - string 1 to 127 chars - E.g. 1.3.6.1
: sec - security - (none,auth,auth/priv)
: auth - algorithm - (md5,sha1)
: (required only if sec is - auth,auth/priv)
: pass1 - auth password - 8 to 31 chars
: (required only if sec is 'auth,auth/priv')
: priv - algorithm - (des, aes)
: (required only if sec is 'auth/priv')
: pass2 - privacy password - 8 to 31 chars
: (required only if sec is 'auth/priv')