Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 380)

368 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Example:
admin(network.wireless.mu-locationing)>
set
admin(network.wireless.mu-locationing)>
set mode enable
admin(network.wireless.mu-locationing)>
set size 200
admin(network.wireless.mu-locationing)>
Network Firewall Commands
br7131>admin(network.firewall)>
Description:
Displays the Mobility 7131 Access Point firewall submenu. The items available under this command
include:
br7131>admin(network.firewall)>show
Description:
Displays the Mobility 7131 Access Point firewall parameters.
Syntax:
Example:
admin(network.firewall)>
show
Firewall Status : disable
mode Enables/disables MU locationing.
size Defines the number of MUs in the locationing table (the maximum allowed is 200).
show Displays the Mobility 7131 Access Point’s current firewall configuration.
set Defines the Mobility 7131 Access Point’s firewall parameters.
access Enables/disables firewall permissions through the LAN and WAN ports.
advanced Displays interoperaility rules between the LAN and WAN ports.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show Shows all Mobility 7131 Access Point firewall settings.