Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual

Page 346

334

Brocade Mobility 7131 Access Point Product Reference Guide

53-1002517-01

CAUTION

If importing a 1.1 (or earlier) baseline configuration, the 802.1x EAP Radius shared secret
password will remain “symbol,” instead of “admin123” (as now required). If the shared secret
password is not changed to “admin123” there will be a shared secret mis-match, resulting in MU
authentication failures. The password cannot be set using the access point Web UI, and must be
changed using the access point CLI.

For information on configuring the encryption and authentication options available to the access
point using the applet (GUI), see Configuring Security Options on page 6-190.

Note: TKIP parameters are only affected if
"tkip" is selected as the encryption type.

tkip

rotate-mode

Enables or disabled the broadcast key.

interval

Sets the broadcast key rotation interval to
in seconds (

300

604800

allow-wpa2-tkip

Enables or disables the interoperation with
wpa2-tkip clients.

preauth

Enables or disables preauthentication (fast
roaming).

opp-pmk-cachin
g

Enables or disables opportunistic PMK.

ptk-timeout

Sets the PTK timeout in milliseconds (1-100).

ptk-retry

Sets the PTK retry count (1-10).

type

Sets the TKIP key type.

key

<256 bit
key>

Sets the TKIP key to <256 bit key>.

phrase

phrase>

Sets the TKIP ASCII pass phrase to phrase> (8-63 characters).

ccmp

rotate-mode

Enables or disabled the broadcast key.

interval

Sets the broadcast key rotation interval to
in seconds (

300

604800

type

Sets the CCMP key type.

phrase

phrase>

Sets the CCMP ASCII pass phrase to phrase> (8-63 characters).

key

<256 bit
key>

Sets the CCMP key to <256 bit key>.

mixed-mode-wit
h-tkip

Enables or disables mixed mode (allowing
WPA-TKIP clients).

mixed-mode-wit
h-wep

Enables or disables mixed mode (allowing
WPA-WEP clients).