Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 257)

Brocade Mobility 7131 Access Point Product Reference Guide 245
53-1002517-01
6
2. Refer to the Proxy Configuration field to define the proxy server’s retry count and timeout
values.
3. Use the Add button to add a new proxy server. Define the following information for each entry :
4. To remove a row, select the row and click the Del (Delete) button.
5. Click Apply to save any changes to the Proxy screen. Navigating away from the screen without
clicking Apply results in all changes to the screen being lost.
6. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the Proxy screen to the last saved configuration.
Retry Count Enter a value between 3 and 6 to indicate the number of times the access point attempts
to reach a proxy server before giving up.
Timeout Enter a value between 5 and 10 to indicate the number of elapsed seconds causing the
access point to time out on a request to a proxy server.
Suffix Enter the domain suffix (such as myisp.com or mycompany.com) of the users sent to the
specified proxy server.
RADIUS Server IP Specify the IP address of the Radius server acting as a proxy server.
Port Enter the TCP/IP port number for the Radius server acting as a proxy server. The default
port is 1812.
Shared Secret Set a shared secret used for each suffix used for authentication with the Radius proxy
server.