Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 391)

Brocade Mobility 7131 Access Point Product Reference Guide 379
53-1002517-01
8
br7131>admin(system)>restart
Description:
Restarts the Mobility 7131 Access Point access point.
Syntax:
Example:
admin(system)>
restart
********************************WARNING***********************************
** Unsaved configuration changes will be lost when the access point is reset.
** Please be sure to save changes before resetting.
**************************************************************************
Are you sure you want to restart the AP-713X?? (yes/no):
AP-7131 Boot Firmware Version 4.4.0.0-xxx
Copyright(c) Brocade 2011. All rights reserved.
Press escape key to run boot firmware ........
Power On Self Test
testing ram : pass
testing nor flash : pass
testing nand flash : pass
testing ethernet : pass
For information on restarting the access point using the applet (GUI), see Configuring System
Settings on page 4-67.
access Goes to the Mobility 7131 Access Point access submenu where Mobility 7131 Access Point access
methods can be enabled.
cmgr Goes the Certificate Manager submenu.
snmp Goes to the SNMP submenu.
userdb Goes to the user database submenu.
radius Goes to the Radius submenu.
ntp Goes to the Network Time Protocol submenu.
logs Displays the log file submenu.
config Goes to the configuration file update submenu.
fw-update Goes to the firmware update submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
restart Restarts the Mobility 7131 Access Point.