Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 448)

436 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(stats)>flash-all-leds
Description:
Starts and stops the illumination of a specified access point’s LEDs.
Syntax:
Example:
admin(stats)>
admin(stats)>
flash-all-leds 1 start
Password ********
admin(stats)>
flash-all-leds 1 stop
admin(stats)>
For information on flashing access point LEDs using the applet (GUI), see Viewing Known Access
Point Statistics on page 7-277.
br7131>admin(stats)>echo
Description:
Defines the echo test values used to conduct a ping test to an associated MU.
Syntax:
wlan Clears individual WLAN statistic counters.
all-radio Clears Mobility 7131 Access Point radio summary information.
radio1 Clears statistics counters specific to radio1.
radio2 Clears statistics counters specific to radio2.
all-mu Clears all MU statistic counters.
mu Clears MU statistics counters.
known-ap Clears Known AP statistic counters.
flash-all-leds Defines the Known AP index number of the target AP to flash.
Begins or terminates the flash activity.
show Shows the Mobile Unit Statistics Summary.
list Defines echo test parameters and result.
set Determines echo test packet data.
start Begins echoing the defined station.
.. Goes to parent menu.
/ Goes to root menu.
quit Quits CLI session.