Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 385)

Brocade Mobility 7131 Access Point Product Reference Guide 373
53-1002517-01
8
Syntax:
For information on configuring the Router options available to the access point using the applet
(GUI), see Configuring Router Settings on page 5-178.
br7131>admin(network.router)>add
Description:
Adds user-defined routes.
Syntax:
Example:
admin(network.router)>
add 192.168.3.0 255.255.255.0 192.168.2.1 LAN1 1
admin(network.router)>
list
----------------------------------------------------------------------------
index destination netmask gateway interface metric
----------------------------------------------------------------------------
1 192.168.3.0 255.255.255.0 192.168.2.1 lan1 1
For information on configuring the Router options available to the access point using the applet
(GUI), see Configuring Router Settings on page 5-178.
br7131>admin(network.router)>delete
Description:
Deletes user-defined routes.
Syntax:
set auth Sets the RIP authentication type (none, simple or MD5).
dir Sets RIP direction (rx, tx or both)
id Sets MD5 authetication ID (1-256) for specific index (1-2).
key Sets MD5 authetication key (up to 16 characters) for specified inded (1-2).
passwd Sets the password (up to 16 characters) for simple authentication.
type Defines the RIP type (off, ripv1, ripv2, or ripv1v2).
dgw-iface Sets the default gateway interface (lan1, lan2, wan or none).
add Adds a route with destination IP address , IP netmask
, destination gateway IP address , interface
LAN1, LAN2 or WAN , and metric set to
(1-65536).
delete Deletes the user-defined route (1-20) from list.