Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 190)

178 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
5
Configuring Router Settings
The Mobility 7131 Access Point router uses routing tables and protocols to forward data packets
from one network to another. The Mobility 7131 Access Point router manages traffic within the
network, and directs traffic from the WAN to destinations on the Mobility 7131 Access Point
managed LAN. Use the Mobility 7131 Access Point Router screen to view the router's connected
routes. To access the Router screen.
1. Select Network Configuration -> Router from the Mobility 7131 Access Point menu tree.
2. Refer to the Mobility 7131 Access Point Router Table field to view existing routes.
The Mobility 7131 Access Point Router Table field displays a list of connected routes
between an enabled subnet and the router. These routes can be changed by modifying the
IP address and subnet masks of the enabled subnets.
The information in the Mobility 7131 Access Point Router Table is dynamically generated
from settings applied on the WAN screen. The destination for each subnet is its IP address.
The subnet mask (or network mask) and gateway settings are those belonging to each
subnet. Displayed interfaces are those associated with destination IP addresses. To
change any of the network address information within the WAN screen, see Configuring
WAN Settings on page 5-127.
3. From the Use Default Gateway drop-down menu, select the WAN or either of the two LANs (if
enabled) to server as the default gateway to forward data packets from one network to
another.
4. To set or view the RIP configuration, click the RIP Configuration button.