Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 440)

428 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
br7131>admin(system.config)>set
Description:
Sets the import/export parameters.
Syntax:
Example:
admin(system.config)>
set server 192.168.22.12
admin(system.config)>
set user myadmin
admin(system.config>
set passwd georges
admin(system.config)>
show
cfg filename : cfg.txt
cfg filepath :
ftp/tftp server ip address : 192.168.22.12
ftp user name : myadmin
ftp password : *******
For configuration file creation and export, only the set radio-config is supported. Therefore, when
configuration files for export are created, a line such as set rf-function X wips / wlan
(where X is 1 or 2) is never be generated.
For configuration file import, the legacy command set rf-function X wips / wlan is
processed as it has historically.
There is no CLI menu allowing the user to enter set rf-function X wips/wlan (where X is
1 or 2).
Instead, the command set radio-configX (where X is 1,2,3,4,5,6,7, or 8) is created in the
configuration files for export.
For information on importing/exporting access point configurations using the applet (GUI), see
Importing/Exporting Configurations on page 4-104.
br7131>admin(system.config)>export
Description:
Exports the configuration from the system.
set file Sets the configuration file name (1 to 39 characters in length).
path Defines the path used for the configuration file upload.
server Sets the FTP/TFTP server IP address.
user Sets the FTP user name (1 to 39 characters in length).
passwd Sets the FTP password (1 to 39 characters in length).