Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 325)

Brocade Mobility 7131 Access Point Product Reference Guide 313
53-1002517-01
8
Syntax:
Example:
admin(network.wan.vpn)>
ikestate
----------------------------------------------------------------------
Tunnel Name IKE State Dest IP Remaining Life
----------------------------------------------------------------------
Eng2EngAnnex Not Connected ---- ---
SJSharkey Not Connected ---- ---
admin(network.wan.vpn)>
For information on configuring IKE using the applet (GUI), see Configuring IKE Key Settings on page
6-226.
Network WAN, Content commands
br7131>admin(network.wan.content)>
Description:
Displays the Outbound Content Filtering menu. The items available under this command include:
br7131>admin(network.wan.content)> addcmd
Description:
Adds control commands to block outbound traffic.
Syntax:
ikestate Displays status about Internet Key Exchange (IKE) for all tunnels. In particular, the table indicates whether IKE is
connected for any of the tunnels, it provides the destination IP address, and the remaining lifetime of the IKE key.
addcmd Adds control commands to block outbound traffic.
delcmd Deletes control commands to block outbound traffic.
list Lists application control commands.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
addcmd web Adds WEB commands to block outbound traffic.
proxy Adds a Web proxy command.
activex Adds activex files.
file Adds Web URL extensions (10 files maximum)