Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 395)

Brocade Mobility 7131 Access Point Product Reference Guide 383
53-1002517-01
8
Default Radio : Radio2
admin(system.power-setup)>
For information on configuring power settings using the applet (GUI), see
Configuring Power Settings on page 4-70.
br7131>admin(system.power-setup)>set
Description:
Sets Mobility 7131 Access Point’s power consumption configuration.
Syntax:
admin(system.power-setup)>
set mode Auto
admin(system.power-setup)>
set power-option 3af option
admin(system.power-setup)>
set def-radio 1
For information on configuring power settings using the applet (GUI), see
Configuring Power Settings on page 4-70..
Adaptive AP Setup Commands
br7131>admin(system)>aap-setup
Description:
Displays the Adaptive AP submenu.
For information on configuring adaptive AP using the applet (GUI), see Adaptive AP Setup on page
4-75.
For an overview of adaptive AP functionality and its implications, see Adaptive AP on page 10-471.
set mode Sets the power mode to either Auto or 3af. Changing the mode requires
restarting the access point.
power-option Defines the power option.
def-radio Defines the access point’s default radio (1-Radio1, 2-Radio2).
show Displays Adaptive AP information.
set Defines the Adaptive AP configuration.
delete Deletes static switch address assignments.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to the Mobility 7131 Access Point system flash.
quit Quits the CLI and exits the current session.