Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 314)

302 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Example:
admin(network.wan)>
show
Status : enable
WAN DHCP Client Mode : disable
IP Address : 10.1.1.1
Network Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Primary DNS Server : 0.0.0.0
Secondary DNS Server : 0.0.0.0
Auto-negotiation : disable
Speed : 100M
Duplex : full
WAN IP 2 : disable
WAN IP 3 : disable
WAN IP 4 : disable
WAN IP 5 : disable
WAN IP 6 : disable
WAN IP 7 : disable
WAN IP 8 : disable
PPPoE Mode : enable
PPPoE User Name : JohnDoe
PPPoE Password : *******
PPPoE keepalive mode : enable
PPPoE Idle Time : 600
PPPoE Authentication Type : chap
PPPoE State
admin(network.wan)>
For an overview of the WAN configuration options available using the applet (GUI), see
Configuring WAN Settings on page 5-127.
br7131>admin(network.wan)>set
Description:
Defines the configuration of the Mobility 7131 Access Point WAN port.
Syntax:
set wan enable / disable Enables or disables the Mobility 7131 Access Point WAN port.
dhcp enable / disable Enables or disables WAN DHCP Client mode.
ipadr Sets up to 8 (using from 1 to 8 ) IP addresses for
the
Mobility 7131 Access Point WAN interface.
mask Sets the subnet mask for the Mobility 7131 Access Point WAN
interface.
dgw Sets the default gateway IP address to .