Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 367)

Brocade Mobility 7131 Access Point Product Reference Guide 355
53-1002517-01
8
br7131>admin(network.wireless.radio.802-11n[5.0 GHz].mesh)>
Description:
Displays the mesh configuration submenu for the 802.11n (5.0 GHz) radio. The items available
under this command include:
Syntax:
br7131>admin(network.wireless.radio.802-11n[5.0
GHz].mesh)>show
Description:
Displays mesh settings and status for the 802.11n (5.0 GHz) radio.
Syntax:
Example:
admin(network.wireless.radio.802-11n[5.0 GHz].mesh)>
show config
Mesh Connection Auto Select : enable
admin(network.wireless.radio.802-11n[5.0 GHz].mesh)>
show status
-----------------------------------------------------------------------------
idx AP MAC Address Channel Signal (dBm)
-----------------------------------------------------------------------------
admin(network.wireless.radio.802-11n[5.0 GHz].mesh)>
show Displays mesh settings and status for the 802.11n (5.0 GHz) radio.
set Defines mesh parameters for the 802.11n (5.0 GHz) radio.
add Adds a 802.11n (5.0 GHz) radio mesh connection.
delete Deletes a 802.11n (5.0 GHz) radio mesh connection.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show config Displays the connection list configuration.
status Shows the available mesh connection status.