Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 157)

Brocade Mobility 7131 Access Point Product Reference Guide 145
53-1002517-01
5
Brocade Mobility recommends using the New MU ACL Policy or Edit MU ACL Policy screens
strategically to name and configure ACL policies meeting the requirements of the particular WLANs
they may map to. However, be careful not to name policies after specific WLANs, as individual ACL
policies can be used by more than one WLAN. For detailed information on assigning ACL policies to
specific WLANs, see Creating/Editing Individual WLANs on page 5-139.
To create or edit ACL policies for WLANs:
1. Select Network Configuration -> Wireless -> MU ACL from the Mobility 7131 Access Point menu
tree.
The Mobile Unit Access Control List Configuration screen displays with existing ACL
policies and their current WLAN (if mapped to a WLAN).
NOTE
When the Mobility 7131 Access Point is first launched, a single ACL policy (default) is available and
mapped to WLAN 1. It is anticipated numerous additional ACL policies will be created as the list of
WLANs grows.
2. Click the Create button to configure a new ACL policy, or select a policy and click the Edit
button to modify an existing ACL policy. The access point supports a maximum of 16 MU ACL
policies.