Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 280)

268 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
7
2. Refer to the Information field to view the Mobility 7131 Access Point 802.11a/n or
802.11b/g/n radio’s MAC address, placement and transmission information.
3. Refer to the Traffic field to view performance and throughput information for the target Mobility
7131 Access Point 802.11a/n or 802.11b/g/n radio.
HW Address The Media Access Control (MAC) address of the Mobility 7131 Access Point housing the
802.11a/n radio. The MAC address is set at the factory and can be found on the bottom of
the access point. For more information on how access point MAC addresses are assigned,
see MAC Address Assignment on page 1-29.
Radio Type Displays the radio type (either 802.11a/n or 802.11b/g/n).
Power The power level in milliwatts (mW) for RF signal strength. To change the power setting for
the radio, see Configuring the 802.11a/n or 802.11b/g/n Radio on page 5-167.
Active WLANs Lists the Mobility 7131 Access Point WLANs adopted by the 802.11a/n or
802.11b/g/n radio.
Placement Lists whether the Mobility 7131 Access Point radio is indoors or outdoors. To change the
placement setting, see Configuring the 802.11a/n or 802.11b/g/n Radio on page 5-167.
Current Channel Indicates the channel for communications between the Mobility 7131 Access Point radio
and its associated MUs. To change the channel setting, see Configuring the 802.11a/n or
802.11b/g/n Radio on page 5-167.
Num Associated MUs Lists the number of mobile units (MUs) currently associated with the Mobility 7131 Access
Point 802.11a/n or 802.11b/g/n radio.