Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 253)

Brocade Mobility 7131 Access Point Product Reference Guide 241
53-1002517-01
6
Configuring the Radius Server
The Radius Server screen enables an administrator to define data sources and specify
authentication information for the Radius Server.
To configure the Radius Server:
1. Select System Configuration -> User Authentication -> Radius Server from the menu tree.
2. From within the Data Source Configuration field, use the Data Source drop-down menu to
select the data source for the Radius server.
NOTE
When using LDAP, only PEAP-GTC and TTLS/PAP are supported.
3. Use the TTLS/PEAP Configuration field to specify the Radius Server default EAP type, EAP
authentication type and a Server or CA certificate (if used).
Local An internal user database serves as the data source. Use the User Database screen to
enter the user data. For more information, see Managing the Local User Database on page
6-246.
LDAP If LDAP is selected, the switch will use the data in an LDAP server. Configure the LDAP
server settings on the LDAP screen under Radius Server on the menu tree. For more
information, see Configuring LDAP Authentication on page 6-242.