Br7131>admin(system.fw-update)>set, Br7131>admin(system.fw-update)>update, Description – Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual
Page 444: Syntax: example
432
Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
automatic firmware upgrade
: enable
automatic config upgrade
: enable
firmware filename
: apn.bin
firmware path
: /tftpboot/
ftp/tftp server ip address
: 168.197.2.2
ftp user name
: jsmith
ftp password
: *******
For information on updating access point device firmware using the applet (GUI), see Updating
Device Firmware on page 4-109.
br7131>admin(system.fw-update)>set
Description:
Defines Mobility 7131 Access Point firmware update settings and user permissions.
Syntax:
Example:
admin(system.fw-update)>
set fw-auto enable
admin(system.fw-update)>
set cfg-auto enable
admin(system.fw-update)>
set file 3.0.0.0-29D
admin(system.fw-update)>
set path c:/fw
admin(system.fw-update)>
set server 157.235.111.22
admin(system.fw-update)>
set user mudskipper
admin(system.fw-update)>
set passwd muddy
For information on updating access point device firmware using the applet (GUI), see Updating
Device Firmware on page 4-109.
br7131>admin(system.fw-update)>update
Description:
Executes the Mobility 7131 Access Point firmware update over the WAN or LAN ports using either
ftp, tftp or SFTP.
set
fw-auto
When enabled, updates device firmware each time the firmware versions are found to
be different between the Mobility 7131 Access Point and the specified firmware on the
remote system.
cfg-auto
When enabled, updates device configuration file each time the confif file versions are
found to be different between the Mobility 7131 Access Point and the specified LAN or
WAN interface.
file
Defines the firmware file name (1 to 39 characters).
path
Specifies a path for the file (1 to 39 characters)..
server
The IP address for the FTP/TFTP server used for the firmware and/or config file update.
user
Specifies a username for FTP server login (1 to 39 characters)..
passwd
Specifies a password for FTP server login (1 to 39 characters).. Default is admin123.