Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 333)

Brocade Mobility 7131 Access Point Product Reference Guide 321
53-1002517-01
8
br7131>admin(network.wireless.wlan)>create
Description:
Defines the parameters of a new WLAN.
Syntax:
Example:
admin(network.wireless.wlan.create)>
show wlan
ESS Identifier :
WLAN Name :
create
show wlan Displays newly created WLAN and policy number.
set ess Defines the ESSID for a target WLAN.
wlan-name Determines the name of this particlular WLAN
(1-32).
5.0GHz Enables or disables access to the Mobility 7131
Access Point 5.0 GHz radio.
2.4Ghz Enables or disables access to the Mobility 7131
Access Point 2.4 GHz radio.
mesh Enables or disables the Client Bridge Mesh
Backhaul option.
hotspot Enables or disables the Hotspot mode.
max-mu Defines the maximum number of MU able to
operate within the WLAN (default = 127 MUs).
idle- timeout Sets the interval the access point uses to timeout
idle MUs from WLAN inclusion. Set between 1
-65532 minutes. Default is 30 minutes.
security Sets the security policy to the WLAN (1-32).
acl Sets the MU ACL policy to the WLAN (1-32).
passwd Defines a Kerberos password used if the WLAN’s
security policy uses a Kerberos server-based
authentication scheme.
no-mu-mu Enables or disables MUs associated to the same
WLAN to not communicate with each other.
sbeacon Enables or disables the AP from transmitting the
ESSID in the beacon.
bcast Enables or disables the Mobility 7131 Access
Point from accepting broadcast IDs from MUs.
Broadcast IDs are transmitted without security.
qos The index name representing the QoS policy used
with this WLAN.
add-wlan Apply the changes to the modified WLAN and exit.
rate-limiting Enables or disables MU Rate Limiting
limit w2wl Sets the per-mu rate limit in kb (in the
wired-to-wireless direction)
limit wl2w Sets the per-mu rate limit in kb (in the
wireless-to-wired direction)