Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 158)

146 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
5
Either the New MU ACL Policy or Edit MU ACL Policy screens display.
3. Assign a name to the new or edited ACL policy that represents an inclusion or exclusion policy
specific to a particular type of MU traffic you may want to use with a single or group of WLANs.
More than one WLAN can use the same ACL policy.
4. Configure the parameters within the Mobile Unit Access Control List field to allow or deny MU
access to the Mobility 7131 Access Point.
The MU adoption list identifies MUs by their MAC address. The MAC address is the MU's
unique Media Access Control number printed on the device (for example,
00:09:5B:45:9B:07) by the manufacturer. A maximum of 200 MU MAC addresses can be
added to the New/Edit MU ACL Policy screen.
5. Click Apply to save any changes to the New MU ACL Policy or Edit MU ACL Policy screen and
return to the Mobile Unit Access Control List Configuration screen. Navigating away from the
screen without clicking Apply results in changes to the screens being lost.
Access for the listed
Mobile Units Use the drop-down list to select Allow or Deny . This rule applies to the MUs listed in the
table. For example, if the adoption rule is to Allow, access is granted for all MUs except
those listed in the table.
Add Click the Add button to create a new entry using only the Start MAC column to specify a
MAC address, or uses both the Start MAC and End MAC columns to specify a range of
MAC addresses.
Delete Click the Delete button to remove a selected list entry.