Viewing mu details – Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) User Manual
Page 284
272
Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
7
3. Click the Refresh button to update the data collections displayed without resetting the data
collections to zero.
4. Click the Echo Test button to display a screen for verifying the link with an associated MU.
For detailed information on conducting a ping test for an MUs, see Pinging Individual MUs
on page 7-274
NOTE
An echo test initiated from the Mobility 7131 Access Point MU Stats Summary screen uses WNMP
pings. Therefore, target clients that are not Brocade Mobility MUs are unable to respond to the echo
test.
5. Click the MU Authentication Statistics button to display a screen with detailed authentication
statistics for the an MU.
For information on individual MU authentication statistics, see
6. Click the MU Details button to display a screen with detailed statistics for a selected MU.
For detailed information on individual MU authentication statistics, see
7. Click the Clear All MU Stats button to reset each of the data collection counters to zero in order
to begin new data collections.
8. Click the Logout button to securely exit the Access Point applet. A prompt displays confirming
the logout before the applet is closed.
Viewing MU Details
Use the MU Details screen to display throughput, signal strength and transmit error information for
a specific MU associated with the Mobility 7131 Access Point.
The MU Details screen is separated into four fields; MU Properties, MU Traffic, MU Signal, and MU
Errors. The MU Properties field displays basic information such as hardware address, IP address,
and associated WLAN and AP. Reference the MU Traffic field for MU RF traffic and throughput data.
Use the RF Status field to reference information on RF signal averages from the target MU. The
Error field displays RF traffic errors based on retries, dropped packets and undecryptable packets.
The MU Details screen is view-only with no user configurable data fields.
To view details specific to an individual MU:
1. Select Status and Statistics -> MU Stats from the Mobility 7131 Access Point menu tree.
2. Highlight a specific MU.
3. Select the MU Details button.
4. Refer to the MU Properties field to view MU address information.