Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 399)

Brocade Mobility 7131 Access Point Product Reference Guide 387
53-1002517-01
8
Syntax:
admin(system.lldp)>
set lldp-mode enable
admin(system.lldp)>
set lldp-refresh 100
admin(system.lldp)>
set lldp-holdtime 2
admin(system.lldp)>
For information on configuring LLDP using the applet (GUI), see Configuring LLDP Settings on page
4-99.
System Access Commands
br7131>admin(system)>access
Description:
Displays the access point access submenu.
br7131>admin(system.access)>set
Description:
Defines the permissions to access the Mobility 7131 Access Point applet, CLI, SNMP as well as
defining their timeout values.
Syntax:
set Sets the LLDP configurarion.
lldp-mode Enables or disables LLDP support.
lldp-refresh Sets the LLDP refresh interval between 15 - 32768 seconds
lldp-mulitplier Sets the LLDP holdtime multiplier between 2 - 10.
show Displays Mobility 7131 Access Point system access capabilities.
set Goes to the Mobility 7131 Access Point system access submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to the Mobility 7131 Access Point system flash.
quit Quits the CLI and exits the current session.
set applet Defines the applet HTTP/HTTPS access parameters.
app-timeout Sets the applet timeout. Default is 300 Mins.
sslv2 Enables/disables SSL v2 support.
cli Defines CLI Telnet access parameters. Enables/disables access from lan and
wan.
ssh Sets the CLI SSH access parameters.