Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 407)

Brocade Mobility 7131 Access Point Product Reference Guide 395
53-1002517-01
8
impcert : imports the target certficate file
(..) : goes to the parent menu
/ : goes to the root menu
save : saves the configuration to system flash
quit : quits the CLI session
For information on configuring certificate settings using the applet (GUI), see Importing a CA
Certificate on page 4-81.
System SNMP Commands
br7131>admin(system)> snmp
Description:
Displays the SNMP submenu. The items available under this command are shown below.
System SNMP Access Commands
br7131>admin(system.snmp.access)
Description:
Displays the SNMP Access menu. The items available under this command are shown below.
access Goes to the SNMP access submenu.
traps Goes to the SNMP traps submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show Shows SNMP v3 engine ID.
add Adds SNMP access entries.
delete Deletes SNMP access entries.
list Lists SNMP access entries.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.