Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 360)

348 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Syntax:
br7131>admin(network.wireless.radio.802-11n[2.4
GHz].mesh)>show
Description:
Displays mesh settings and status for the 802.11n (2.4 GHz) radio.
Syntax:
Example:
admin(network.wireless.radio.802-11n[2.4 GHz].mesh)>
show config
Mesh Connection Auto Select : enable
admin(network.wireless.radio.802-11n[2.4 GHz].mesh)>
show status
-----------------------------------------------------------------------------
idx AP MAC Address Channel Signal (dBm)
-----------------------------------------------------------------------------
admin(network.wireless.radio.802-11n[2.4 GHz].mesh)>
br7131>admin(network.wireless.radio.802-11n[2.4 GHz].mesh)>set
Description:
Defines mesh parameters for the 802.11n (2.4 GHz) radio.
Syntax:
show Displays mesh settings and status for the 802.11n (2.4 GHz) radio.
set Defines mesh parameters for the 802.11n (2.4 GHz) radio.
add Adds a 802.11n (2.4 GHz) radio mesh connection.
delete Deletes a 802.11n (2.4 GHz) radio mesh connection.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show config Displays the connection list configuration.
status Shows the available mesh connection status.
set Enables or disables auto select mesh connections.